Drip Irrigation Line 1/4″ Tubing 100′ ROLL, 6″ Emitter Spacing.52 GPH, Color Black .170 ID x 240 OD – Will Work from Gravity Feed

#ad
#ad
DIG oso-100-6in #ad - The inline drip emitter is built with a large filter along the cross section of the drip emitter to ensure that moving particles on the bottom of the micro tubing from entering the labyrinth water path, ensuring trouble free operation and long life. This tubing has emitters spaced 6" apart for your convenience.

Use with 1/4" Fittings. The micro-line drip line with drip emitters is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. Attach to 1/2" drip tubing with 1/4" barbed fittings; compatible with most 1/4" fittings. Flexible tubing for easy installation. Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures.

Drip Irrigation Line 1/4" Tubing 100' ROLL, 6" Emitter Spacing.52 GPH, Color Black .170 ID x 240 OD - Will Work from Gravity Feed #ad - Resistant to chemicals and fertilizers commonly used in landscaping.

More information about DIG oso-100-6in #ad

Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack

#ad
#ad
Orbit Underground/Sunmate 67431 #ad - Thirty pieces are included in the assortment pack. The barb design makes for fast and easy installation. Drip watering saves water in drought conditions. Drip watering saves homeowners time, money and water. Includes an assortment of the most commonly used 1/4-inch drip fittings. For use with 1/4-inch distribution or soaker tubing.

Orbit DripMaster 67431 1/4-Inch Barb Assortment, 30-Pack #ad - Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. The orbit 1/4-inch barb assortment pack gives you all of the common 1/4-inch barb parts that you will need for your drip system. For outdoor use with cold water only.

More information about Orbit Underground/Sunmate 67431 #ad


Similar products



Orbit 67401 25-Count 1/4-Inch Barb Tee

#ad
#ad
Orbit 67401 #ad - For outdoor use with cold water only. Orbit 67401 25-count 1/4-inch barb tee Includes an assortment of the most commonly used 1/4-inch drip fittings. Double barb design adds additional holding power. Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. 25 per bag.

Orbit 67401 25-Count 1/4-Inch Barb Tee #ad - For use with 1/4-inch distribution or soaker tubing. For use with 1/4" distribution or soaker tubing.

More information about Orbit 67401 #ad


Similar products



Raindrip 646050B Double Sided Hole Plugs, 50 Per Bag

#ad
#ad
Raindrip 646050B #ad - Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. For outdoor use with cold water only. For use with 1/4" distribution or soaker tubing. Includes an assortment of the most commonly used 1/4-inch drip fittings. 25 per bag. For use with 1/4-inch distribution or soaker tubing.

50 pack, double hole plugs, double-ended, double-duty plugs seal either large or small holes in 1/2", 5/8" or 710" hose. This product is a 50Pk double hole Plug. Double barb design adds additional holding power. Purpose of use for fasteners & hooks, hardware-plugs. Manufactured in china.

More information about Raindrip 646050B #ad


Similar products



Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required

#ad
#ad
Habitech #ad - Manufactured in china. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications. Double barb design adds additional holding power. This product is a 50Pk double hole Plug. Senninger 25 psi pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.

Save money and time buying everything you need at once. You will receive one complete pre-assembled kit. For outdoor use with cold water only. Purpose of use for fasteners & hooks, hardware-plugs. Jumpstart your drip irrigation installation with this set of essential components for building a maintenance-free drip system.

Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required #ad - 25 per bag. Connect your drip irrigation system to your water supply, maintain optimally low flow water pressure, keep out debris with a filter, and prevent dirt backflow all with a single pre-assembled unit. Connect ½" tubing to any standard ¾" male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit.

Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. For every irrigation system large to modest, it all begins at the faucet.

More information about Habitech #ad


Similar products



Raindrip 307050B Barbed Tees, 1/4-Inch, 50 Per Bag, Original Version

#ad
#ad
Raindrip 307050B #ad - Double barb design allows for water pressures up to 50 P. I. Leakproof connector is compatible with any 1/2" tubing sizes. 520 to. 620 id inner diameter including Rain Bird and Dig. Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.

Don't settle for leaks and blowouts. No. For use with 1/4" distribution or soaker tubing. Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. Senninger 25 psi pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.

Raindrip 307050B Barbed Tees, 1/4-Inch, 50 Per Bag, Original Version #ad - Save money and time buying everything you need at once. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications.50-pack 1/4-in polypropylene Drip Irrigation Tees. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention.

S. Used to establish a 1/4" branch from a 1/4" tube or two 1/4" branches from a 1/2" hose. R307ct: type: barbed, package quantity: 5, Pressure Rating: 50 psi, Package Type: Card No.

More information about Raindrip 307050B #ad


Similar products



DIG Corporation Drip Line 100', 6" Spacing, 1/4" .52 GPH, color black .170 ID x 240 OD

#ad
#ad
Dig #ad - Double barb design adds additional holding power. For use with 1/4-inch distribution or soaker tubing. Ideal for use with raised garden beds, farm, residential, greenhouse gardening and agricultural watering applications.50-pack 1/4-in polypropylene Drip Irrigation Tees. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention.

Use to connect 2 sections of 1/4" tubing in order to direct water to another location or connect 1/4" tubing to a supply line. Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, maintain optimally low flow water pressure, keep out debris with a filter, and prevent dirt backflow all with a single pre-assembled unit.

DIG Corporation Drip Line 100', 6" Spacing, 1/4" .52 GPH, color black .170 ID x 240 OD #ad - Connect ½" tubing to any standard ¾" male outside faucet, spigot, hose bibb, garden hose or sprinkler manifold in seconds for an easy fit. Exclusive design allows use with higher water pressures up to 50 PSI. For use with 1/4" distribution or soaker tubing. Senninger 25 psi pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.

Save money and time buying everything you need at once.

More information about Dig #ad


Similar products



Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black

#ad
#ad
Rain Bird T22-250S #ad - Double barb design adds additional holding power. Compatible with most brands of 1/4" Barbed Fittings, Spot Watering Emitters, Micro-Bubblers, Misters and Sprays. Designed for underground or above-ground installation. Ideal for use with raised garden beds, farm, residential, greenhouse gardening and agricultural watering applications.

50-pack 1/4-in polypropylene Drip Irrigation Tees. Industry leading flexibility allows tighter turns with fewer elbows for fast, easy installation. Professional-grade for unmatched resistance to chemicals, algae growth and UV damage. Rugged, flower bed, flexible tubing that's easy to unroll and stake in garden, ground cover or other landscaped areas.

Rain Bird T22-250S Drip Irrigation 1/4" Blank Distribution Tubing, 250' Roll, Black #ad - Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices. Rain bird “the intelligent use of Water” Includes an assortment of the most commonly used 1/4-inch drip fittings. Designed for underground or above-ground installation. Use 1/4" barb fittings.

Flexible tubing for easy installation. Resistant to chemicals and fertilizers commonly used in landscaping.

More information about Rain Bird T22-250S #ad


Similar products



Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack

#ad
#ad
Rain Bird BC25-30PS #ad - Over the past 80-years Rain Bird has received more than 450 patents worldwide. For outdoor use with cold water only. Extra flexibility for kink-free installation, unmatched resistance to chemicals, algae growth and UV damage. Since the very beginning, sports arenas, golf courses, Rain Bird has produced and offered the industry’s broadest range of high-quality irrigation products for: farms, commercial developments and homes.

We’re grateful to have received numerous recognition awards from many of our valued partners. Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas. Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices.

Rain Bird BC25-30PS Drip Irrigation Universal 1/4" Barbed Coupling Fitting, Fits All Sizes of 1/4" Drip Tubing, 30-Pack #ad - Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent dirt backflow all with a single pre-assembled unit. Connect ½" tubing to any standard ¾" male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit.

Includes: 10 couplings, 5 tees, 10 plugs, and 5 elbows. Durable construction provides years of reliable use. Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. This product is a 50Pk double hole Plug.

More information about Rain Bird BC25-30PS #ad


Similar products



Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT

#ad
#ad
Habitech #ad - Rugged, flexible tubing that's easy to unroll and stake in garden, flower bed, ground cover or other landscaped areas. Use as the main line in a small Drip irrigation system or to branch off from larger 1/2" Drip tubing to micro-watering devices. Power-loc fittings don't leak. Leakproof connector is compatible with any 1/2" tubing sizes.

520 to. 620 id inner diameter including Rain Bird and Dig. Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately. Don't settle for leaks and blowouts. For use with 1/4" distribution or soaker tubing.

Habitech 3-Pack 1/2 Inch Drip Irrigation Tubing to Faucet/Garden Hose Adapter - Reusable Connector Fittings for Most Rain Bird, Orbit, Dig, Toro 1/2 or 5/8 Tubing x 3/4" FHT #ad - Connect your drip irrigation system to your water supply, maintain optimally low flow water pressure, keep out debris with a filter, and prevent dirt backflow all with a single pre-assembled unit. Connect ½" tubing to any standard ¾" male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit.

Includes: 10 couplings, 10 plugs, 5 tees, and 5 elbows. Durable construction provides years of reliable use. Durable construction provides years of reliable use.

More information about Habitech #ad


Similar products