HHIP 3900-2120 Aluminum Vise Work Stop, 7/8″ Capacity


HHIP 3900-2120 - Single thumb screw tightens clamp to vise jaw. Two ground pins on both sides of clamp. Easily mounts to the top of most vise jaws. To fit angle lock type vises. Vise work stop 7/8 Capacity. Two ground pins on both sides of clamp. 7/8" capacity. 7/8" capacity. To fit angLock type milling vises. Single thumb screw tightens clamp to vise jaw.

Easily mounts to the top of most vise jaws.

More information about HHIP 3900-2120

HHIP 3900-2131 Steel Quick Clamp Vise Work Stop


HHIP 3900-2131 - Very handy for small parts that do not require the full length. Clamps quickly & easily to the top of existing hard jaws or soft jaws. Steel body 1" wide x. 38" height. Fits mill vises with 1/2-3/4" jaws. Quick clamp Vise Work Stop. Steel body 1" wide x 038" height. Fits mill vises with 1/2-3/4" vise jaws. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws.

More information about HHIP 3900-2131


Similar products



HHIP 3900-2125 Tool Steel Universal Work Stop


HHIP 3900-2125 - Serves as a rigid stop for milling set-up. Use with vises, angle plates, jigs, etc. Made of hardened tool steel. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws. Serves as a rigid stop for milling set-up. Made of hardened tool steel.

Column: 5/8 x 6-1/4" base: 5/8 x 2 x 4-3/8" Rod: 3/8 x 10". Use with vises, jigs, angle plates, etc. Fits mill vises with 1/2-3/4" jaws. Steel body 1" wide x. 38" height.

More information about HHIP 3900-2125


Similar products



OEMTOOLS 25025 26 Blade Master Feeler Gauge


OEM 25025 - This oemtools 26 blade master feeler Gauge is perfect for measuring gap widths and other vital measurements. 26 hardened, Tempered Steel Blades. Serves as a rigid stop for milling set-up. Chrome plated main Shaft for Easy Clean Up and Professional Look. Use with vises, jigs, angle plates, etc. Made of hardened tool steel.

Blade protector has Thumb Notch to Aid in Removal of Blades. Steel body 1" wide x. 38" height. Each blade is Laser Etched with Inches and Millimeters. Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws.

OEMTOOLS 25025 26 Blade Master Feeler Gauge - . This oemtools feeler gauge also features a thumb notch for easy blade removal. Each blade has been laser etched with SAE and Metric sizes and constructed by hardened, tempered steel. Fits mill vises with 1/2-3/4" jaws.

More information about OEM 25025


Similar products



BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks


1-2-3 Blocks 54988 - Steel body 1" wide x. 38" height. Fits mill vises with 1/2-3/4" jaws. Chrome plated main Shaft for Easy Clean Up and Professional Look. Blade protector has Thumb Notch to Aid in Removal of Blades. Heat treated above 48 Rockwell "C";. 0001 to. 0003 over allowance for nominal lapping. Squareness of all sides is within.

0002 per inch. Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Use with vises, jigs, angle plates, etc. Made of hardened tool steel. 26 hardened, Tempered Steel Blades. Precision ground. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws.

BL-123 Pair of 1" x 2" x 3" Precision Steel 1-2-3 Blocks - Serves as a rigid stop for milling set-up. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Each blade is Laser Etched with Inches and Millimeters.

More information about 1-2-3 Blocks 54988


Similar products



MILLING VISE WORK STOP QUICK CLAMP CLAMPING JAW KIT


xycity - Chrome plated main Shaft for Easy Clean Up and Professional Look. Hardened Guide pins. Precision ground. Fits mill vises with 1/2-3/4" jaws. Blade protector has Thumb Notch to Aid in Removal of Blades. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping.

Each blade is Laser Etched with Inches and Millimeters. Use with vises, angle plates, jigs, etc. Made of hardened tool steel. Serves as a rigid stop for milling set-up. Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Material: steel width: 25mm minimum clamping: 15mM Maximum Clamping: 26MM Key Features: Precision Vise stop Black oxide treated steel to resist rusting.

MILLING VISE WORK STOP QUICK CLAMP CLAMPING JAW KIT - Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws. Steel body 1" wide x. 38" height. 26 hardened, Tempered Steel Blades.

More information about xycity


Similar products



Mitutoyo 050102, Edge Finder, 1/2" Dia. Shank, .200" Dia. Tip


Mitutoyo 50102 - Steel body 1" wide x. 38" height. 26 hardened, Tempered Steel Blades. Mitutoyo edge finder, shank Dia: 1/2", Tip Dia:. 200". Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Serves as a rigid stop for milling set-up. Use with vises, angle plates, jigs, etc. Made of hardened tool steel. Blade protector has Thumb Notch to Aid in Removal of Blades.

Precision ground. Chrome plated main Shaft for Easy Clean Up and Professional Look. Fits mill vises with 1/2-3/4" jaws. All working surfaces are hardened and ground. Each blade is Laser Etched with Inches and Millimeters. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping.

Mitutoyo 050102, Edge Finder, 1/2" Dia. Shank, .200" Dia. Tip - Used in a milling machine to find the workpiece edge. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws.

More information about Mitutoyo 50102


Similar products



HFS R 10 Pair 1/8" Steel Parallel Set 10 Pair Parallels .0002" Hardened New


HFS - Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge.

All working surfaces are hardened and ground. Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Easier handling because there are 2 holes in each one. 0002" in Parallelism. Paired +/-. 0002" in Height. Precision ground. Each blade is Laser Etched with Inches and Millimeters. Combo set, 10 matched Pairs, Thin Style. Serves as a rigid stop for milling set-up.

HFS R 10 Pair 1/8" Steel Parallel Set 10 Pair Parallels .0002" Hardened New - Description: +/-. 0002" in parallelism Paired +/-. 0002" in height made from high quality tool steel stress relief against distortion, 3/4, thin style all the size are 6" long and 1/8" wide or thick easier handling because there are 2 holes in each one 1/8" Incrementation in 1/8" from 1/2" to 1-5/8" Each Set contains 1 Pair of the height listed: 1/2, 1-1/4, 7/8, 1-1/8, precision ground and hardened Combo Set, 10 Matched Pairs, 1, 5/8, 1-3/8, 1-1/2 & 1-5/8 Fits mill vises with 1/2-3/4" jaws.

More information about HFS


Similar products



Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide


Hexagon Metrology 599-281-1021 - All the size are 6" Long and 1/8" Wide or Thick. Reversible for male and female hole centering. Very handy for small parts that do not require the full length | Clamps quickly & easily to the top of existing hard jaws or soft jaws. 0002" in Parallelism. Paired +/-. 0002" in Height. The tap guide aligns the tap with the center of the hole and maintains the tap at a right angle to the hole.

Combo set, 10 matched Pairs, Thin Style. The body has a 1/2" body diameter and is constructed of case-hardened steel for durability and has a knurled body to ensure secure handling. All working surfaces are hardened and ground. 26 hardened, Tempered Steel Blades. Case-hardened steel with knurled body for durability and secure handling.

Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide - The tap guide is reversible for use with male and female hole centering. The company, is headquartered in North Kingstown, founded in 1833, RI. What's in the box?tap guidePlastic storage case Fits mill vises with 1/2-3/4" jaws. Chrome plated main Shaft for Easy Clean Up and Professional Look. Case hardened.

More information about Hexagon Metrology 599-281-1021


Similar products



HFS Tm 20 Pars 40pcs 1/32" X6" Steel Parallel SET .0002" Hardened Precision Machinist Tools in Case


HardwareFactoryStore.com - Case-hardened steel with knurled body for durability and secure handling. Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. Easier handling because there are 2 holes in each one. Blade protector has Thumb Notch to Aid in Removal of Blades. Each blade is Laser Etched with Inches and Millimeters.

1/2" body diameter. Measures: 00015 inch 0038 mm to 0025 inch 0635 mm. Parallelism: +/-. 0001". Steel body 1" wide x. 38" height. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle. Combo set, 10 matched Pairs, Thin Style. Paired +/-. 0002" in Height. Hardness: 50 HRc. Matched pair height: +/-.

More information about HardwareFactoryStore.com


Similar products



Noga NogaFlex Holder - Model: NF1022


Noga NF1022 - Matched pair height: +/-. 0001". All working surfaces are hardened and ground. Each blade is Laser Etched with Inches and Millimeters. Hardness: 50 HRc. Case hardened. Cross-drilling design for extra strength and minimum weight. Five 3/8-16 tapped holes are provided for clamping. Used in a milling machine to find the workpiece edge.

Precision ground. 26 hardened, Tempered Steel Blades. Case-hardened steel with knurled body for durability and secure handling. 1/2" body diameter. Size range: 1/2 - 1-11/16" by 1/16" intervals. Parallelism: +/-. 0001". Chrome plated main Shaft for Easy Clean Up and Professional Look. Most useful for centering holes on milling machines.

Noga NogaFlex Holder - Model: NF1022 - Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm. Made from high quality tool steel. Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle.

More information about Noga NF1022


Similar products